The Wash - 1L Ready to Use

£14.00

6 reviews
Free standard UK delivery over £30
Made in the UK
Secure checkout

The everyday wash. Ready to use, no measuring required. For a quick clean, a wash on the go or for the rider who wants a powerful foam clean straight out of our aluminium bottle.

The trigger nozzles can be easily switched between foam for more dwell time and a mist spray for a more liquid clean.

  • Near neutral pH surfactant system lifts road grime, dust leaving surfaces underneath unaffacted
  • Infused with lubricants so grit floats off and rinses away without streaking
  • Safe and effective on painted surfaces, anodised components, plastics, rubber, chrome, bare metal, aluminium
  • No aggressive builders or solvents doing repeat damage
  • Bio-degradable active ingredients
  • Can be refilled using The WASH-CONCENTRATE.
  • Made in the UK.
LOFT. WASH Other brands
Cleaning action Lifts and encapsulates dirt via surfactants Dissolve grime via chemical etching
pH 7-8 (near neutral) 10-13 (strong alkaline)
Aluminium & Alloy Safety No chalky white oxidation High risk of severe surface etching and dulling
Anodised Finish Protection Preserves custom colours and coatings Fades, bleaches and streaks parts
Wax & Sealants Gentle on pre-existing protective layers Quickly strips waxes, glazes and sealants
Rubber Seals & Hoses Maintains elasticity Saps oils, dries and causes cracks
Rinse Window Wider window for rinsing Short. Dries faster, leaving streaks
What's in it?

1. The Oil-Lifter

The largest ingredient. Chain fling, fork seep and road film are mineral oils, which caustic cleaners can't react with at all. This surfactant lifts them physically: it wets under the oil, pulls it off the surface and wraps it in the water so it can't settle back. Works at any pH, on any oil. Chosen for its short chain, which penetrates thin oil films faster and rinses away without leaving a slick behind.

2. The Foam Builder

Coconut-derived, and the same type of surfactant found in mild shampoos. A bike is mostly vertical surfaces, so foam has to stand on a tank side or fork leg long enough to work; this is what makes it cling. It also gives the wash its slip, so when you switch to the mitt, grit floats off the paint instead of being dragged across it.

3. The Carrier

The most powerful all-round detergent of the four. Once the oil-lifter has loosened the grime, this keeps it suspended in the water until the hose takes it away, rather than letting it re-settle on the bike. Loading up on it is the cheap way to make a wash feel strong, and it comes at a cost you don't see until later: it strips waxes and polishes, pulls chain lube out of the O-rings while it's lifting the fling off the swingarm, dries out rubber seals and leaves plastics chalky and grey. The oil-lifter does the heavy work. This one just makes sure the result leaves.

4. The Stabiliser

Sits at the bubble walls and slows the foam draining, so it stays standing through the dwell instead of sliding off in seconds. Also gives the concentrate its body.

Together

The oil-lifter breaks the grime. The carrier takes it away. The foam builder and stabiliser make it cling and glide. Each one is there because the others can't do its job, and each is dosed at the level a motorcycle needs.

pH 8 maximum. Biodegradable per EC 648/2004.

DANGER: Causes serious eye damage. Keep out of reach of children.
Instructions
  1. Spray liberally onto a cool, dry or pre-rinsed bike.
  2. Leave 4-6 minutes to loosen dirt.
  3. Agitate with a sponge or wash mitt.
  4. Rinse thoroughly with clean water.
  5. For best results, follow with The Shield (No.2)

Avoid using in direct sunlight. Do not let the product fully dry. If The Wash fully dries, repeat the above steps.
View details